Ceramic pipes for chimneys

Ceramic pipes for chimneys

See the compliance certificate

View Certificate of Conformity Chamotte ceramic chimney pipes are a safe and economical solution.
Chamotte chimneys are characterized by high safety and a long service life. They are fireproof, resistant to high temperatures (over 1000 ° C), are resistant to thermal shock (shock temperature changes), to chemical effects of condensate acids.

Low porosity provides them with high water resistance and prevents leakage of combustion products of fuel into the living quarters. Due to the high strength of each element, chimney systems made of chamotte ceramic can be applied in both individual and multi-apartment houses. Such pipes can be used for stoves, fireplaces and heating boilers. They are suitable for any fuel, including the currently popular gas. The service life of such systems is comparable to the life of an apartment building.

Ceramic pipes are the best solution for chimneys.

Advantages of ceramic systems:
- resistance to the influence of high temperatures and temperature changes;
-resistance to corrosion;
-universal (suitable for any boiler, including condensing, and in addition, fireplaces and stoves);
-they are used not only together with walls, but in some cases they are detached;
- they are not affected by deformation;
- resistant to ignition of soot and the influence of fluorine compounds;
- easy to process, that is, they are easy to drill, cut and polished;
- ceramic systems are slowly cooled and store heat well;
- a long service life (the service time of such systems is comparable with the life of a residential house).
In general, chamotte ceramic chimney pipes are an ideal choice, guaranteeing your comfort and safety!

Elements of construction.
JSC "BRP" produces chamotte pipes with diameters from 12 to 30 cm using modern equipment made of high-quality clays, environmentally friendly and safe for human health. The production program includes all the elements necessary for installing the chimney: base (condensate collector), tee for inspection, tees for connecting 900and 45o, straight pipes and sealant for assembling the entire system.

The base is designed to divert the atmospheric moisture accumulating in the pipe and the condensate formed during the cooling of the flue gases into the building's sewerage system or into special containers for subsequent neutralization. One base is suitable for several diameters, which significantly reduces the production and storage program.

Pipes of circular cross-section with a smooth inner surface guarantee the best aerodynamic properties of the structure under any operating conditions: both with natural draft and with excess pressure. The proposed geometry of pipes and all shaped elements ensures their reliable articulation with each other due to the puncture joint, and a specially developed acid-proof mass seals the seams and excludes the possibility of moisture penetration onto the outer surface of the pipe. Connecting the pipes "on the water" provides drainage of condensate and atmospheric moisture to the lower part of the system for subsequent discharge into the sewage system.

Revision tees and tees for connection of the consumer have a standard height of 66 cm. All tees from the inside have a groove for condensate drainage, which prevents moisture from entering the heat source, as well as its accumulation on the inner surface of the shutter of the door. Tees for connection can have an angle of 45 ° or 90 °.

  

 Specification

 CharacteristicsValue

Material

shamotte

Apparent density, g/cm3
2,0-2,1
Absorption of moisture, g/(h * m2) 2,2
Compressive strength, N/mm2 11-13
Resistance to acids,% 1,0
Operating temperature,  оС min 800
Maximum application temperature, оС 1580
Recommended type of fuel
Solid fuel coal, firewood, wood pellets
Liquid diesel fuel
Gaseous fuel natural gas
Dimensional tolerances, mm
Length +/-5 mm
Ovality, mm max 3

 

Straight pipe

Item No.Internal diameter d mm / external D, mmWall thickness, mmProduct weight, kg
1 120/150 15 4,4
2 140/170 15 5,0
3 160/190 15 5,7
4 160/200 20 7,8
5 180/220 20 8,6
6 200/240 20 9,5
7 220/260 20 10,4
8 250/300 25 14,9
9 300/360 30 21,4
 
Tee
Item No.Internal diameter d mm / external D, mmWall thickness, mmProduct weight, kg
1 120/150 15 9,7
2 140/170 15 11,1
3 160/190 15 12,5
4 160/200 20 17,1
5 180/220 20 19,0
6 200/240 20 20,8
7 220/260 20 22,6
8 250/300 25 32,3
9 300/360 30 46,3
 
 
Corner tee
 
Item No.Internal diameter d mm / external D, mmWall thickness, mmProduct weight, kg
1 120/150 15 11,7
2 140/170 15 13,3
3 160/190 15 14,7
4 160/200 20 20,2
5 180/220 20 22,1
6 200/240 20 23,9
7 220/260 20 25,7
8 250/300 25 35,7
 Inspection tee
 
Item No.Internal diameter d mm / external D, mmWall thickness, mmProduct weight, kg
1 120/150 15 13,0
2 140/170 15 14,4
3 160/190 15 15,7
4 160/200 20 19,6
5 180/220 20 21,5
6 200/240 20 23,3
7 220/260 20 25,0
8 250/300 25 33,6
9 300/360 30 46,3
 
 Shutter of the tee for inspection, Supplied complete with tee for inspection
 
Item No.Product weight, kg
1,2,3,4 2,9
5,6,7,8,9 3,1

 

 
 Base with condensate drain
 
Item No.Product weight, kg
120-160 5,7
180-220 7,3
250-300 16,0